Wifi doesn't work in bathroom

Taking a dump at 10 PM. I can connect to the wifi but nothing loads then my phone disconnects. Does the wifi on my new router suck or is the power adapter crap?

It might work on and off.

Plugged the USB cable it came with in, and if I run a speed test on my desktop while the router is connected to OpenVPN, my phone gets disconnected from wifi. I’ll try a Monoprice cable. See what sensors says, not sure what “ACIN” is, but it’s under 1A, the USB adapter is supposed to be 2A.

With the USB cable my Banana Pi R1 came with:
root@OpenWrt:~# sensors<br />sun4i_ts-isa-0000<br />Adapter: ISA adapter<br />SoC temperature: +38.5 C <br /><br />axp209-isa-0000<br />Adapter: ISA adapter<br />ACIN: +4.77 V <br />VBUS: +0.00 V <br />BATT: +0.00 V <br />APS: +4.65 V <br />CHIP: +42.8 C <br />BATT: 0.00 W <br />ACIN: +0.69 A <br />VBUS: +0.00 A <br />BATT_CHRG: +0.00 A <br />BATT_DISCHRG: +0.00 A

With a Monoprice cable:
root@OpenWrt:~# sensors<br />sun4i_ts-isa-0000<br />Adapter: ISA adapter<br />SoC temperature: +38.0 C <br /><br />axp209-isa-0000<br />Adapter: ISA adapter<br />ACIN: +5.28 V <br />VBUS: +0.00 V <br />BATT: +0.00 V <br />APS: +4.91 V <br />CHIP: +44.0 C <br />BATT: 0.00 W <br />ACIN: +1.07 A <br />VBUS: +0.00 A <br />BATT_CHRG: +0.00 A <br />BATT_DISCHRG: +0.00 A <br />

1.07 A is the highest, looks like it goes up and down if you run it more then once with the Monoprice cable. Got up to 1.17 A while connected to OpenVPN and running a speed test. Looks like the cable it came with is crap, possibly the wall wart too.